How to Evaluate Wipe Features for USP <797> and USP <800> Workflows

Wide Angle Cleanroom Pharmacy Being Sanitized

Application-Based Wipe Selection for Compounding Environments

In USP <797> and USP <800> environments, wipe selection should begin with the procedure the wipe must support. The wipe interacts with the cleaning chemistry, surface, operator, and controlled environment, so its characteristics need to fit the defined cleaning process.

A wipe alone does not create compliance. It is one component within a broader system of procedures and controls. The objective is to identify characteristics appropriate for the process in which the wipe will be used.

USP <797> and USP <800> create different considerations

Although USP <797> and USP <800> are frequently discussed together, the two chapters address different aspects of compounding practice.

USP <797> addresses sterile compounding and the controls used to reduce microbial, particulate, and other contamination risks associated with compounded sterile preparations.

USP <800> addresses hazardous drug handling and includes defined practices associated with deactivation, decontamination, cleaning, and disinfection.

For a USP <797> workflow, sterility requirements, particle and fiber contribution, aseptic practice, and compatibility with cleaning and disinfecting processes may be important considerations. Within a USP <800> workflow, the evaluation also needs to account for the chemicals used during the facility’s hazardous drug cleaning process, the surfaces being treated, the documented procedure, and waste-handling requirements.

No single wipe feature satisfies either chapter by itself.

Wipe features to evaluate within USP <797> and USP <800> workflows

1. Particle and fiber generation

A wipe used in a controlled environment should not unnecessarily add particles or fibers to the cleaning process. Substrate construction, material selection, edge treatment, and consistency all influence wipe behavior during folding, saturation, and use.

Consider:

  • Is the wipe designed for controlled-environment use?
  • Is its particle and fiber performance appropriate for the task?
  • How does the material behave when folded, wetted, and used?
  • Is the construction appropriate for the surface and cleaning method?

The relevant measure is not simply whether a product is described as “low lint.” It is whether its cleanliness characteristics match the requirements of the application.

2. Sterility where required

Not every cleaning task requires a sterile wipe. Where a procedure requires a sterile consumable, evaluate more than the word sterile on the product description.

Consider:

  • sterility status and supporting documentation
  • packaging and presentation
  • transfer into the controlled environment
  • storage and staging
  • how the product is incorporated into the established procedure

Sterility should reflect an application requirement, not function as a stand-alone indicator of product suitability.

3. Compatibility with the chemistry and surface

The wipe and chemistry function together during use. Within USP <797> and USP <800> workflows, evaluate whether the substrate is compatible with the cleaning, disinfecting, deactivating, or decontaminating agents specified by the facility’s procedure.

The wipe should maintain sufficient integrity for the task and exhibit a residue profile appropriate for the surface and application. Where a presaturated wipe is being considered, also evaluate whether the incorporated solution and saturation level align with the intended procedure.

Where permitted by the facility’s procedures, a ready-to-use format may help reduce variability associated with manually saturating wipes at the point of use.

4. Absorbency and fluid control

Absorbency is not simply about how much liquid a wipe can hold. In controlled cleaning processes, how the wipe manages that liquid can be equally important.

Consider whether the material supports:

  • appropriate wetting of the surface
  • controlled solution release
  • sufficient wetness through the required wiping step
  • residue pickup
  • manageable fluid behavior during use

Different tasks may require different characteristics. A small critical surface may benefit from precise liquid control while larger surfaces may call for greater capacity and coverage.

5. Size, construction, and format

Wipe dimensions and construction affect how operators interact with a surface. Match the format to applications such as:

  • broad surfaces
  • equipment wipe-down
  • pass-through and transfer surfaces
  • isolators and restricted-access areas
  • smaller work zones or touchpoints

The appropriate format should support the physical motion and access requirements of the cleaning procedure.

6. Packaging, traceability, and documentation

In regulated environments, substrate performance is only part of the qualification decision. Packaging, lot information, and supporting documentation also need to align with the facility’s requirements.

Evaluation may include:

  • packaging for storage and transfer
  • availability of lot information
  • relevant product documentation
  • product sampling or qualification support

The exact documentation required should be defined by the facility’s quality system and intended application.

Applying these considerations to USP <797>

For USP <797> applications, evaluate wipes in the context of the facility’s sterile-compounding and controlled-environment procedures. Depending on the task, relevant attributes may include:

  • low particle and fiber contribution
  • sterility where required
  • compatibility with cleaning agents and disinfectants
  • packaging appropriate to controlled transfer and use
  • consistent substrate performance
  • format appropriate to the classified area and cleaning task

The appropriate combination depends on the facility’s procedure and intended use.

Applying these considerations to USP <800>

For USP <800> applications, begin with the facility’s hazardous drug handling procedure. The selected wipe needs to fit the chemicals, surfaces, process steps, and waste-handling practices already defined for the application.

Consider:

  • compatibility with the agents used during deactivation, decontamination, cleaning, or disinfection
  • sufficient durability during the wiping task
  • residue appropriate to the process
  • dry or presaturated presentation based on procedural needs
  • ability to maintain integrity throughout use

The wipe itself is not a compliance solution. It needs to support the procedure established by the facility.

A practical evaluation checklist

  1. What exact process step will the wipe support?
  2. What characteristics does the environment require from the substrate?
  3. Which chemistries will contact the wipe?
  4. Is sterility required for this specific task?
  5. What residue, particle, and fiber characteristics matter?
  6. Does the wipe size and construction fit the surface and operator technique?
  7. Would dry or presaturated presentation better fit the established procedure?
  8. What packaging, traceability, and documentation does the quality system require?

This approach moves the decision away from finding a wipe marketed for “USP <797>” or “USP <800>” and toward determining whether the product actually fits the workflow.

The Berkshire perspective

Berkshire helps customers evaluate wipes and other cleanroom consumables in the context of real applications, including the surface, chemistry, cleanliness requirements, sterility needs, packaging, and documented procedures.

For USP <797> and USP <800> workflows, that distinction is particularly important.

Start with the process. Then select the wipe characteristics that support it.